FX3U-2HC

Mitsubishi PLC high-speed counter block FX3U-2HC Product parameters/specifications:

Input channel number: 2CH
Input form: collector open, differential line driver (differential line driver output encoder is connected to 5V terminal)
Input voltage: DC5V/DC12V/DC24V optional
Maximum response frequency: 1 phase 1 input /1 phase 2 input less than 200kHz, 2 phase input less than 200kHz (1 times)/ less than100kHz (2 times)/ less than 50kHz (4 times)
Counting range: 32: - 2147483648 ~ + 2147483647
16 bits: 0 to 65,535(BFM#3, #2, #43, upper limit specified #42)
Counting mode:
Automatic upgrade/drop (however, the counter entered in phase 1 depends on the direction of the instruction count below).
[H/W increases. Drop] ON/OFF/ ON A phase input terminal increases the down countdown.
The present value (K0/K1) of BFM#1, #41 increases/decreases the countdown.
Consistent output (compare) : The current value of the counter is compared to the set value when the comparison output 30 s ON is reset and cleared up to 100 s (close)
Input form: open collector output 2 points each DC5V~24V 0.5A
Expression (LED) : A, B, DIS, PRE, YH1, YH2, POWER, UP, DOWN
Points for input and output points: 8 points
Applicable series: FX5U, FX5UC, FX3U(V2.20 +), FX3UC(V2.20 +)
Fx5-cnv-bus must be used for FX5U
FX5UC must be fX5-CNV-Bus or FX5-CNV-BUSc
FX3UC must be fX2NC-CNV-if or FX3UC-1Ps-5V
Power supply: DC5V 245mA(internal power supply in the unit)
External dimension: 90(H)*55(W)*87(D)[mm]
Weight: 0.2 kg